Concentric Security sliding beam crash gates offer high security protection from vehicular attacks and prevent the vehicle from entering a restricted area. Our Model GS-05-430 sliding beam is designed for frequent use and is intended for high security and low to moderate traffic flow applications.

These barriers are crash tested to Department Of Defense specifications and have obtained a K4 / L2 equivalent certification.

The barrier is manufactured using cantilevered construction with no hardware in the roadway. All serviceable parts are easily accessible without the removal of the gate leaf. A hydraulic pumping unit operates the Model GS-05-430 gate. The unit is sized to provide continuous normal speed duty and optionally, fast operating speed.

Unit operating times will be approximately 10-15 seconds for normal speed and 7-10 seconds for fast speed.

All sliding beam crash gates come equipped with our standard “open and close” controller; however custom controllers are available to make your unit operate in conjunction with card readers, audible alarms, loop detectors, and lights.

Installation requires excavation on both the hinge and receiver stanchions.

Standard Features

Beam Size: 36” high x 144” clear opening Recommended Power Supply : 208 volt, 3 Ø, 60 Hz Mode of Operation : Hydraulic “Open and close” controller

Available Options

Loop Detector Custom Controllers

More Information

For more information about sliding beam gates download one of the following documents: Specification (MS Word format, 25 KB) Drawing (PDF format, 400 KB)

Documents provided on this site may require additional software to be viewed. These applications can be downloaded from the following companies:
Adobe Reader
Microsoft Word Viewer

Back to Cantilever Gates